Fluid extractor 'in' and 'out'.

With overflow protection. fluid inlet with main hose connector.
This fluid extractor comes with 3 suction hoses, all with a different diameter. Select the right hose for the job at hand and connect it to the main hose or to the connector on the pump. Switch the handle to the ‘in’ position. By pumping you will create a vacuum inside the reservoir. Now oil or fluid is transported, without spillage, to the reservoir. the reservoir can contain fluids up to a hundred degrees Celsius. The pressure gauge indicator will move anticlockwise.
To extract the oil or fluid from the reservoir, simply switch the handle in to the ‘out’ position. Again, without spillage you can now transport the oil or fluid from the reservoir to a different dispenser. Reset the pressure gauge by pressing the ‘push’ button. Now the pressure gauge indicator will move in a clockwise direction.
Furthermore this fluid extractor is equipped with a handle for easy displacement. The reservoir contains a release valve button. This gives you the possibility to relieve the vacuum at any given time.
Available in 6 and 18 litre.